How to Care for Your Vinyl Wrap
Caring for your vehicle’s vinyl wrap is not unlike caring for any fine paint finish. Use high-quality products designed specifically for car care and these cleaning and maintenance procedures will help keep your vehicle wraps looking their best. Many companies have begun offering products specifically designed for cleaning and protecting vinyl making caring for your wrap easier than ever.
Ceramic Pro’s Vinyl and PPF coat has been specifically designed for vehicle vinyl wraps and paint protection film. It makes the film easier to clean and keeps it cleaner longer. Ceramic Pro also helps to prevent minor scratches and UV damage caused by exposure to the elements. The coating also adds a depth and shine that is in a league of its own.
Wash whenever the car appears dirty. Contaminants allowed to remain on the vehicle wrap may be more difficult to remove during cleaning. Rinse off as much dirt and grit as possible with a spray of water.
Use a wet, non-abrasive detergent such as 3M™ Car Wash Soap 39000 or Meguiar’s NXT Generation® Car Wash or Deep Crystal® Car Wash and a soft, clean cloth or sponge. Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.
Automated Car Wash
Brush-type car washes are not recommended as they can abrade the film and cause edges to lift or chip, as well as dulling the film’s appearance. Brushless car washes are acceptable.
Although hand washing is the preferred cleaning method, pressure washing may be used under these conditions.
- Ensure the water pressure is kept below 2000 psi (14 MPa).
- Keep water temperature below 80°C (180°F).
- Use a spray nozzle with a 40-degree wide angle spray pattern.
- Keep the nozzle at least 1 foot (300 mm) away from and perpendicular (at 90 degrees) to the graphic.
Important Note! Holding the nozzle of a pressure washer at an angle to the graphic may lift the edges of the film.
The following restoration recommendations will help keep your vehicle wraps looking their best.
- Do not use any abrasive polishes or cutting compounds.
- Do not use any polishing or wax products on matte or textured films.
- If there is wax or wax residue on the surface, remove with an all-purpose cleaner.
Wipe off immediately to avoid degrading the vinyl and adhesive. Then wash, rinse, and dry as soon as possible.
Store indoors or undercover whenever possible. Wrap films, just like paint, are degraded by prolonged exposure to sun and atmospheric pollutants, particularly on the horizontal surfaces such as the hood, trunk lids, and roofs. Whenever possible, store in a garage or at least in a shaded area during the day. At night, protect the car from dew or rain, which may contain acidic pollutants (a common problem in many large metropolitan areas). When a garage is not available, consider using a cloth car cover at night. If your wrap film starts to discolor or turn brown (which is caused by acidic pollution), immediately have a professional remove the wrap film from the vehicle to avoid staining the underlying paint.
Soften difficult contaminants such as bug splatter, bird droppings, tree sap and similar contaminants by soaking them for several minutes with very hot, soapy water. Rinse thoroughly and dry. If further cleaning is needed, test one of these products in an inconspicuous area to ensure no damage to the wrap film:
Meguiar’s Gold Class™ Bug and Tar Remover or 3M™ Citrus Base Cleaner. Isopropyl alcohol (IPA) (two parts IPA to 1 part water) or denatured alcohol may also help. Spot clean the contaminants. Do not use